Installation
20
NXP-TPI/4 NetLinx Touch Panel Interface
The following table lists the pinouts, signals, and pairing associated with the Ethernet connector.
FIG. 12 diagrams the RJ-45 pinouts and signals for the Ethernet RJ-45 connector and cable.
Hooking-up the TPI/4 Rear Cable Connections
1.
Discharge any acquired static electricity by touching a grounded metal object or by touching the
grounded bolt attached to the rear of TPI/4 unit.
2.
Verify the connection of the touch input cables from the touch monitor into the Touch Input Port on
the rear of the unit. This cable sends the touch input coordinates from the touch panel to the TPI/4.
3.
Verify the connection of the monitor HD-15 video cable from the touch monitor to the
HD-15 VGA Output Port on the rear of the TPI/4.
4.
Verify the connection of related PS/2 and USB cables to the rear of the unit.
5.
Connect the power cable to the touch monitor (or other monitor type).
6.
Connect the terminal-end of the power cable into an outlet to power-up the touch device.
7.
Connect either an RJ-45 10/100baseT Ethernet connector to the Ethernet port or an ICSNet
connector to the ICSNet port on the rear of the unit. Communication can be achieved through either
method although not through both at the same time.
Ethernet RJ-45 Pinouts and Signals
Pin
Signals
Connections Pairing
Color
1
TX +
1 --------- 1
1 --------- 2
Orange-White
2
TX -
2 --------- 2
Orange
3
RX +
3 --------- 3
3 --------- 6
Green-White
4
no connection
4 --------- 4
Blue
5
no connection
5 --------- 5
4 --------- 5
Blue-White
6
RX -
6 --------- 6
Green
7
no connection
7 --------- 7
7 --------- 8
Brown-White
8
no connection
8 --------- 8
Brown
FIG. 12
RJ-45 wiring diagram
Instead of a touch input device (such as from a touch panel-ELO, Wacom, etc...)
being connected to the rear of the TPI/4 for touch input; a monitor can be connected
to the unit without providing touch input.
When a monitor (or other non-touch device) is connected, choose NullTouch
for the touch driver.
1 2 3
4 5 6 7 8
1 2 3
4 5 6 7 8
Содержание NetLinx NXP-TPI/4
Страница 38: ...TPI 4 and Panel Interface Setup 32 NXP TPI 4 NetLinx Touch Panel Interface...
Страница 60: ...Upgrading TPI 4 Firmware 54 NXP TPI 4 NetLinx Touch Panel Interface...
Страница 138: ...Troubleshooting 132 NXP TPI 4 NetLinx Touch Panel Interface...
Страница 147: ...Appendix 141 NXP TPI 4 NetLinx Touch Panel Interface...