Firmware Pages and Descriptions
83
5" Modero Widescreen Touch Panel
Setting the image cache
In the
Protected Setup
page:
1.
Press the
Cache
button in the
Protected Setup Navigation Buttons
section. This opens the
Image
Cache
page.
2.
Set the cache expiration in the field
Flash/RAM Cache Expires
. The Up and Down arrows increment
through the available time frames.
3.
Press the
Enable
button to turn on image caching. The button appears illuminated when enabled.
You can allocate Flash memory for image caching, but RAM cache is always enabled.
Select the Up and Down arrows for the field
Flash Cache Size
to increase or reduce the amount of Flash
memory used; the maximum amount of flash that can be allocated for caching is 75% of available flash.
Image Caching Page Elements (Cont.)
Flash/RAM Cache Expires
Press the Up and Down arrows to change the amount of time the images stay
in cache memory. The options are:
• Never
• 2 Hours
• 8 Hours
• 1 Day
• 2 Days
• 5 Days
Enable:
Press this button to toggle the image Flash cache option On and Off.
Clear Cache:
Press this button to clear both the Flash and RAM cache of all stored images.
Image Cache Status:
The status of the memory available versus in use.
RAM Max Size
The maximum amount of memory available for all image caching.
RAM Current Size
The memory that is currently in use for caching static and dynamic images.
RAM Hit Rate
The percentage of image requests (static and dynamic) satisfied by accessing
the cache.
100 * (# of cache hits) / (# of cache hits + # of cache misses)
# of cache hits - the number of times an image was requested that the image
was found in the cache
# of cache misses - the number of times an image was requested that the
image could not be found in the cache, and the image had to either be loaded
from flash or obtained via the network (for dynamic images). It is considered a
RAM Cache Miss even if the image is subsequently found in flash cache.
Items in Cache (RAM)
The number of images that are currently stored in the RAM cache.
Flash Current Size
The maximum flash space allocated for image caching. Flash space is used for
caching only when there is not enough available memory in the RAM cache for
a newly requested image (it is used only for dynamic images).
Flash Hit Rate
The percentage of image requests (dynamic only) that are satisfied by
accessing the flash cache.
100 * (# of flash cache hits) / (# of flash cache hits + # of flash cache misses)
# of flash cache hits - # of times a dynamic image could not be found in RAM
cache but was found in flash cache
# of flash cache misses - # of times a dynamic image could not be found in
either RAM or flash cache. RAM cache hits are not relevant in this calculation.
Items in Cache (Flash)
The number of images that are currently stored in the Flash cache.
Содержание Modero NXD-CV5
