AMX Modero NXD-CV5, Руководство по эксплуатации/справочник

Страница: 24 / 162

Installation
18 5" Modero Widescreen Touch Panel
3.
Assemble the Kit components:
To assemble the Bezel Kit with Buttons (FIG. 15):
From along the internal surface of the colored Faceplate, install the six colored buttons
by firmly inserting them into the button openings until the Button latch secures the button
in place (FIG. 15).
Grasp the provided Button Trim Ring on both sides and fit it into the groove along the
outside surface of the Faceplate.
Gently insert the Button Trim Ring latches into their corresponding openings on the outer
surface of the internal Faceplate (FIG. 15).
Firmly press down around the Button Trim Ring until all of the latches are securely
inserted into their openings on the Faceplate, and the Button Trim Ring is securely
fastened. Verify the Button Trim Ring is firmly inserted onto the Faceplate and that there
are no gaps between this Trim Ring and the outer surface of the Faceplate.
Continue on to Step 4 to complete the installation process.
To assemble the Bezel Kit with No-Buttons (FIG. 16):
Grasp the provided No-Button Trim Ring on both sides and fit it into the groove along
the outside surface of the Faceplate.
Firmly press down around the No-Button Trim Ring until all of the latches are securely
inserted into their openings on the Faceplate, and the Trim Ring is securely fastened.
Verify the No-Button Trim Ring is firmly inserted onto the Faceplate and that there are
no gaps between this Trim Ring and the outer surface of the Faceplate.
Continue on to Step 4 to complete the installation process.
4.
Place that new Faceplate onto the main NXD-CV5 unit. Make sure to align the Microphone, Light,
and PIR Motion sensor locations on the main unit to their respective openings on the Faceplate
assembly.
FIG. 15 Installing the Button Bezel Kit (NXA-BEZ-5B)
Colored Button Trim Ring
Trim
Colored Faceplate
CV5 Panel/enclosure
Ring
Latches
(outside surface shown)
Button latch
Button installation
(showing the internal surface of Faceplate)