Installation
14
5" Modero Widescreen Touch Panel
8.
Firmly press down around the No-Button Trim Ring until all of the latches are securely inserted into
their openings on the Faceplate, and the No-Button Trim Ring is securely fastened. Verify the
No-Button Trim Ring is firmly inserted onto the Faceplate and that there are no gaps between this
Trim Ring and the outer surface of the Faceplate.
9.
Place the Faceplate back onto the main NXD-CV5 unit. Make sure to align the Microphone, Light,
and PIR Motion sensor locations on the main unit to their respective openings on the Faceplate
assembly.
FIG. 10
Removing the default Button Trim Ring
FIG. 11
Inserting the No-Button Trim Ring
Default Button Trim Ring
Trim
(with button openings)
B
Faceplate
CV5 Panel/enclosure
Ring
Latches
Button latch
Button removal
(showing the internal surface of Faceplate)
(outside surface shown)
No-Button Trim Ring
Faceplate (outer surface shown)
Hollow button openings
Содержание Modero NXD-CV5
