Setup Pages and Descriptions
56
NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom
Setting the Image Cache
In the
Protected Setup
page:
1.
Press the
Cache
button in the Other Settings popup menu. This opens the
Cache Settings
page.
2.
Set the cache expiration in the field
Flash/RAM Cache Expires
. The Up and Down arrows increment through the
available time frames.
Cache Settings Page (Cont.)
Connection Status icon: The icon in the upper-right corner of each Setup page shows online/offline state of the panel to
the master.
• Bright red - disconnected
• Bright green - connected. Blinks when a blink message is received to dark green every 5
seconds for half a second then go back to bright green.
• Bright yellow - panel missed a blink message from the master. It will remain yellow for 3
missed blink messages and then turn red. It will return to green when a blink message is
received.
Note
: a Lock appears on the icon if the panel is connected to a secured NetLinx Master.
Image Cache Settings:
Allocates Flash memory for image caching.
Flash Cache Size
Press the Up and Down arrows to add and remove flash memory. Flash memory allocation
cannot exceed the amount of Flash memory on the panel.
Flash/RAM Cache
Expires
Press the Up and Down arrows to change the amount of time the images stay in cache
memory. The options are:
• Never
• 2 Hours
• 8 Hours
• 1 Day
• 2 Days
• 5 Days
Enable:
Press this button to toggle the image Flash cache option On and Off.
Clear Cache:
Press this button to clear both the Flash and RAM cache of all stored images.
Image Cache Status:
The status of the memory available versus in use.
RAM Max Size
The maximum amount of memory available for all image caching.
RAM Current Size
The memory currently in use for caching static and dynamic images.
RAM Hit Rate
The percentage of image requests (static and dynamic) satisfied by accessing the cache.
• 100 * (# of cache hits) / (# of cache hits + # of cache misses)
• # of cache hits - the number of times an image was requested that the image was found in
the cache
• # of cache misses - the number of times an image was requested that the image could not
be found in the cache, and the image had to either be loaded from flash or obtained via the
network (for dynamic images). It is considered a RAM Cache Miss even if the image is
subsequently found in flash cache.
Items in Cache
(RAM)
The number of images that are currently stored in the RAM cache.
Flash Current Size
The maximum flash space allocated for image caching.
Flash space is used for caching only when there is not enough available memory in the RAM
cache for a newly requested image (it is used only for dynamic images).
Flash Hit Rate
The percentage of image requests (dynamic only) that are satisfied by accessing the flash
cache.
• 100 * (# of flash cache hits) / (# of flash cache hits + # of flash cache misses)
• # of flash cache hits - # of times a dynamic image could not be found in RAM cache but was
found in flash cache
• # of flash cache misses - # of times a dynamic image could not be found in either RAM or
flash cache. RAM cache hits are not relevant in this calculation.
Items in Cache
(Flash)
The number of images that are currently stored in the Flash cache.
Содержание Modero NXD-500i
