AMX Modero NXD-500i, Руководство по эксплуатации/справочник

Страница: 57 / 144

Setup Pages and Descriptions
45 NXD-500i 5" Modero Wall/Flush Mount Touch Panel with Intercom
Time & Date Settings Page
The Time & Date Settings page (FIG. 43) allows setting and alteration of the time and date information on the NetLinx
Master. If either the Time or Date is modified on this page and then updated to the Master by pressing the Set Time
button, all devices communicating to that target Master will then be updated to reflect the new information.
The elements of the Time & Date Settings page are as follows:
Panel Information Page (Cont.)
Setup Pages Version: Displays the type and version of the Setup pages being used by the panel.
Screen Width: Displays the pixel width being used to display the incoming signal on the Modero panel.
• The maximum available screen width on a NXD-500i panel is 800 pixels.
Screen Height: Displays the pixel height being used to display the incoming signal on the Modero panel.
• The maximum available screen height on a NXD-500i panel is 480 pixels.
Screen Refresh Rate: Displays the refresh rate applied to the incoming signal from the panel. Default rate is 60.
Screen Rotation: Displays the degree of rotation applied to the on-screen image.
Power Up Pages: Displays the first touch panel page assigned for display after the device is powered-up.
• This information is taken from the TPD4 project file.
• Most projects begin with a Main page.
Start Up String: Displays the start-up string.
Wake Up String: Displays the wake up string used after an activation from a timeout.
Sleep String: Displays the sleep string used during a panel’s sleep mode.
File System: Displays the amount of Flash memory available on the Modero panel.
RAM: Displays the available RAM (or Extended Memory module) on the Modero panel.
Panel Start Time: Displays the last time the panel booted.
Bulb Hours: Displays the total time that the panel has been at full brightness.
FIG. 43 Time and Date Settings page
The only way to modify a panel’s time, without altering the Master, is through NetLinx
code.
Time & Date Settings Page
Back: Returns to the previously active touch panel page without saving changes.
Wired icon: The icon to the left of the Connection Status Icon displays that the current connection to the
Master is Wired (image of three networked computers).