manualshive.com logo in svg

AMX Modero NXD-1200VG, Руководство по эксплуатации/справочник, Страница: 42 / 274

Поделиться
Скачать
AMX Modero NXD-1200VG Скачать руководство пользователя страница 42

TPDesign4 Project Files

22

TPDesign4 Touch Panel Design Software (v2.10 or higher)

Setting Project Properties

Select 

File > Project Properties

 to open the Project Properties dialog. This is a multi-tab dialog 

allowing you to view and edit the target touch panel’s properties. Depending upon the panel selected, 
each panel will support all or part of the following properties at the panel level:

 

Project Information tab

: Includes basic project information, the 

Use system generated 

filenames 

option and Protection options with Password fields. See the 

Project Properties 

dialog - Project Information tab

section on page 22 for details.

 

Panel Setup Information tab

: Includes touch panel setup options including Refresh 

Frequency, Marquee Speed, Panel Strings (Startup, Wakeup and Sleep), Power-up and 
Inactivity Settings and Feedback Blink Rate. See the 

Project Properties dialog - Panel Setup 

Information tab

section on page 24 for details.

 

Sensors tab

: Includes Channel/Level and Port settings for Light Sensors, Motion Sensors, 

Battery Levels and Cradle Sensors. See the 

Project Properties dialog - Sensors tab

section on 

page 27 for details.

 

IR Emitters and Receivers tab

: Includes Channel Port information for AMX IR Emitters, 

AMX IR Receivers and User (non-AMX) IR Emitters. See the 

Project Properties dialog - IR 

Emitters and Receivers tab

section on page 28 for details.

Project Properties dialog - Project Information tab

Use the options in the Project Information tab of the Project Properties dialog (FIG. 21) to view/edit file 
information associated with the active project file. The information in this tab was set up when the 
project was created, in the New Project Wizard. These items represent the various components of the 
System-Generated File Name. 

If the 

Use System-Generated File Names 

option was not selected in the New Project Wizard, these fields 

will be blank. 

The options in this tab include:

FIG. 21  

Project Properties dialog - Project Information tab

Содержание Modero NXD-1200VG



















































































































































































































































































Отзывы:

Нет отзывов