manualshive.com logo in svg

AMX Modero NXD-1200VG, Руководство по эксплуатации/справочник, Страница: 231 / 274

Поделиться
Скачать
AMX Modero NXD-1200VG Скачать руководство пользователя страница 231

File Transfer Operations

211

TPDesign4 Touch Panel Design Software (v2.10 or higher)

resident on the target panel, or in your panel file on your PC (for uploads) are not included in 
the transfer.

 

Normal transfer (all panel files)

: This option sends all panel files.

 

Full clean transfer (all panel & system graphic files)

: Select this option to automatically 

wipe out any existing project files resident in the target panel before loading the new panel 
file.

 

Open received panel (uploads only)

: Select this option to automatically open the panel file 

once it is received.

 

Clear from status queue when complete

: This option (enabled by default) clears each 

transfer from the Transfer Status Window when complete.

5.

Click 

Send

 or 

Receive

 to begin the transfer

Virtual NetLinx Master TCP/IP Transfers

TPDesign4 v2.1 supports direct connection to G4 panels (via TCP/IP), for situations where the target 
panel is not connected to a NetLinx Master. In this situation, you can use your PC's Ethernet connection 
to connect directly to the panel, using your PC as a Virtual NetLinx Master. This feature is primarily 
intended for use by graphic designers, to allow them to create panel files and then test them on a panel 
without necessarily having access to a Master.

There are three basic steps to Masterless TCP/IP file transfers:

1.

Configure the touch panel for Masterless TCP/IP transfers

2.

Configure TPDesign4 for Masterless TCP/IP transfers

3.

Transfer the Files Using a Virtual NetLinx Master TCP/IP connection

Configuring TPDesign4 for Virtual NetLinx Master TCP/IP Transfers

1.

Select 

Transfer > Connect 

to open the Connect dialog (or click the toolbar button).

2.

Select 

[Virtual NetLinx Master] 

from the Connection drop-down list.

3.

Click the 

Properties

 button to access the Virtual NetLinx Master Properties dialog, which displays 

the 

Host Name

 and 

IP address 

for your PC.

4.

Write down the IP address. 

a.  

Enter this IP address as the Master's 

URL/IP

 on the 

System Connection Setup page

 on the 

touch panel.

b.  

Once you have entered the IP address of the PC (acting as a Virtual NetLinx Master), press the 

Reboot

 button on the System Connection Setup page to reboot the panel.

5.

Select 

Transfer > Send to Panel

 to open the Send To Panel dialog. The panel should appear in the 

list of Online Devices. Once you can see the panel online, you may transfer panel files without the 
need for an intermediate NetLinx master.

6.

To receive files from the panel, select 

Transfer > Receive From Panel

.

If you are simply sending a panel file to a panel, you don't need to use the Full Clean 
option, since any existing panel files on the target panel will be wiped out anyway. 
The Full Clean option adds considerable time to the transfer, since it involves sending 
many more files, and is not necessary in most cases.

Modem transfer is the slowest method of transferring TPD4 panel files to the target 
device. This method can range in speed but on average communicates at 3 Kbps. 

Содержание Modero NXD-1200VG



















































































































































































































































































Отзывы:

Нет отзывов