manualshive.com logo in svg

AMX Modero NXD-1200VG, Руководство по эксплуатации/справочник, Страница: 250 / 274

Поделиться
Скачать
AMX Modero NXD-1200VG Скачать руководство пользователя страница 250

Appendix A: G4 Computer Control

230

TPDesign4 Touch Panel Design Software (v2.10 or higher)

 

< mdlGuestPC >

 - local name for this instance of the cc-GuestPC module

 

< vdvGuestPC >

 - device for cc-GuestPC to use for internal data events; this should be a 

DEFINE_DEVICE for the events to work properly

2.

cc-GuestPC.tko

 is located in the module folder on the USB stick. The cc-GuestPC.tko file needs to 

be added to your workspace in Studio to compile with source code. 

3.

Compile and load source code to NetLinx master.

3: G4CC (Computer Control) Configuration:

Launch 

configCC.exe

 (on the USB stick). Use this application to configure G4CC.

Using configCC.exe to Configure G4CC

configCC.exe

 is the Configuration Utility for G4CC (included on the same USB stick). Use this 

application to designate up to four Modero / TPI/4 panels that will be allowed to control this computer. 

1.

Connect the computer to an Ethernet Network that can communicate with the NetLinx Control 
System.

2.

Insert the USB Computer Control Stick into the USB port on the computer that is being controlled. 
A series of USB driver installation popup windows appear.

3.

Confirm that a new USB detection icon appears in the lower-right taskbar of the display window. 

4.

Use the computer’s file browser to navigate to the USB stick’s drive location and open the Config 
folder on the USB Control Stick drive directory.

5.

Double-click the 

configCC

 executable to run the G4 Computer Control Configuration Utility from 

the NXA-USBTN drive (FIG. 93).

This application allows you to designate up to four Modero or TPI/4 panels with rights to 
control this computer. 

The following information is needed for each Modero or TPI/4 panel:

 

NetLinx Master IP Address/DNS (Fixed IP/URL)____.____.____.____ 
(Acquire the IP address of the NetLinx master by using NetLinx Studio 2.1 Diagnostics Tab / 
Network Addresses / Get IP Information).

 

G4 Touch Panel Device ID: _______ 
(Acquire the panel device number in the online tree of NetLinx Studio).

 

G4 Touch Panel System: _______ 
(Acquire the system number in the online tree of NetLinx Studio).

FIG. 93  

 G4 Computer Control Configuration Utility (configCC.exe)

Содержание Modero NXD-1200VG



















































































































































































































































































Отзывы:

Нет отзывов