File Transfer Operations
206
TPDesign4 Touch Panel Design Software (v2.10 or higher)
Connecting to a NetLinx Master via TCP/IP
1.
Select
Transfer > Connect
to open the Connect dialog.
2.
In the
Connect
dialog, click
New
to establish a new connection. The invokes the Connection
Settings dialog.
3.
In the
Connection Settings
dialog, enter a unique name for the connection configuration that are you
setting up (in the
Name
field). This allows you to recall the configuration you specify later, without
having to re-configure.
4.
Select
TCP/IP
from the
Transport
drop-down list.
5.
Enter the IP address of the target NetLinx Master in the
IP Address/DNS Name
field.
6.
The
IP Port
should always be set to
1319
(default).
Do not change this number
.
7.
Click
OK
to save these settings and return to the Connect dialog.
8.
Press the
Connect
button to establish the connection.
Connecting to a NetLinx Master via Serial Port
1.
Select
Transfer > Connect
to open the Connect dialog.
2.
In the
Connect
dialog, click
New
to establish a new connection. The invokes the Connection
Settings dialog.
3.
In the
Connection Settings
dialog, enter a unique name for the connection configuration that are you
setting up (in the
Name
field). This allows you to recall the configuration you specify later, without
having to re-configure.
4.
Select
Serial
from the
Transport
drop-down list.
5.
Configure the
Settings
parameters (
COM Port, Data Bits, Parity, Baud Rate, Stop Bits
and
Flow
control
) as needed.
6.
Click
OK
to save these settings and return to the Connect dialog.
7.
Press the
Connect
button to establish the connection.
Connecting to a NetLinx Master via Modem
1.
In the
Connect
dialog, click
New
to establish a new connection. The invokes the Connection
Settings dialog.
2.
In the
Connection Settings
dialog, enter a unique name for the connection configuration that are you
setting up (in the
Name
field). This allows you to recall the configuration you specify later, without
having to re-configure.
3.
Select
Modem
from the
Transport
drop-down list.
4.
Configure the
Settings
parameters (
COM Port, Data Bits, Parity, Baud Rate, Stop Bits, Flow control
and
Phone #
) as needed.
5.
Click
OK
to save these settings and return to the Connect dialog.
6.
Press the
Connect
button to establish the connection.
Содержание Modero NXD-1200VG
