background image

Working With States

135

TPDesign4 Touch Panel Design Software (v2.10 or higher)

Adding States To a Multi-State Button

There are three ways in which new states can be added to a Multi-State General or Multi-State Bargraph 
button (the number of states is fixed for the other button types):

 

By duplicating an existing state on the button 

 

By pasting states that have been copied to the clipboard 

 

By a drag-and-drop copy operation

For Multi-General buttons the different states are used to animate a button from Off to On (Animate 
Time Up) and back again to Off (Animate Time Down). When the button is turned on it will display all 
the assigned states from first to last with a specified time interval between each state's display. When the 
button is turned back off, the states will be displayed in reverse order. The interstate time intervals are 
user definable in 1/10th second increments. A zero entry will automatically advance / retreat to the 
ending / beginning state without displaying any intervening states.

For Multi-Bargraph buttons, the level will directly reflect the displayed state. You can set an allowable 
range within a bargraph that has states. Anything outside of that range will not be represented by a state.

For buttons with multiple states, Send Commands can set the state number, provided it is not a level type 
button.

Duplicating an Existing State on the Button

1.

If the new states are to be added to the end of the collection (in the State Manager window), right-
click to open the State Manager Context Menu, and select

 Add States

2.

If the new states are to be inserted elsewhere in the collection, first select the state prior to which the 
new states will be created, then right-click to open the State Manager Context Menu and select 

Insert States

3.

The Add States dialog (or the Insert States dialog if you selected Insert States) is displayed. Use 
these dialogs to specify the number of states to be created, and which existing state to duplicate 
(which will be highlighted in the State Manager as the state number is changed).

4.

When the desired number of states and the state to duplicate have been chosen, press 

OK

 and the 

new states will be added to the collection in the desired location. Otherwise, press Cancel to exit the 
dialog without creating any states.

Adding States From the Clipboard

One way to add new states to a Multi-State General or Multi-State Bargraph button is by pasting states 
from the clipboard. Pasting states from the clipboard offers more power and flexibility than single state 
duplication. States may be copied from another button, page, or popup page, or even from a different 
panel:

1.

First select the button, page, or popup page whose states will be copied. 

2.

In the State Manager window, select the source states. Hold down the Ctrl key while left-clicking to 
add states to the selection. Left-click + Shift to select a range of states.

3.

When the source states have been selected, copy them to the clipboard by selecting either 

Edit > Copy

State Manager Context Menu

 > 

Copy

, or the Ctrl-C keyboard accelerator.

• Image/Text Positioning:

This option opens the Text/Image Position dialog, which allows you 
to specify the position of images and/or text on the selected button 
state(s).

• Animation  Wizard:

This option launches the Animation Wizard. The Animation Wizard 
guides you through the process of creating an animated button.

• Tweeners:

Click to open the Tweeners sub-menu where you can select from 
several types of tweeners to use (for animation purposes).

Содержание Modero NXD-1200VG



















































































































































































































































































Отзывы: