AMX Epica DGX 144, Инструкция по эксплуатации

Страница: 92 / 107

Appendix C – APDiagnostics
88 Epica DGX 144 Instruction Manual
Types of Files
The following three types of files are zipped and archived. The file name for each includes the date and
time zipped, e.g., Diagnostic_03.02.09_14.24.50.zip (zipped on March 2, 2009 at 2:24:50 pm).
Log (.apd, .zip) – contains all data displayed in the APDiagnostics interface in text format.
Can be loaded when the program is opened in Emulation mode to view data for trend analysis
and troubleshooting; see page 91.
Packet (.acp) – contains all system activity data (packet transactions between APDiagnostics
and the enclosure) in libpcap format. Advanced users can open .acp files with a packet/
network analyzer, such as “Analyzer” (http://analyzer.polito.it/).
Activity (.log) – displays system activity in the Activity Log dialog box in text format.
Application Preferences
To access the Application Preferences dialog box and set preferences:
1.
Select Options > Preferences.
The Preferences dialog box has two tabs: General and Logging.
General Tab
To set general application preferences:
1.
For the upper set of preferences, click the applicable Enabled check boxes.
Always Perform Live Network Discover* (selected by default)
Open Activity Viewer at Startup
Use Last Comm-Link at Startup (selected by default)
Show Mode-Selection Dialog at Startup (selected by default)
Auto-Connect in Acquisition mode (selected by default)
2.
For the lower set of preferences, edit information in place (Help boxes appear).
Emulation Mode Packet Interval
Cached Probe History
3.
Click OK.
* If this preference is “off,” the program will use the last XNNet ID stored in its registry (and expects
that enclosure to be present).
Click to enable
Edit in place