AMX Epica DGX 144, Инструкция по эксплуатации

Страница: 30 / 107

Installation and Setup
26 Epica DGX 144 Instruction Manual
Linking Epica DGX 144 to Enclosure with 10Base-T Ethernet Port
An Epica DGX 144 can be directly linked to an Optima, Optima SD, Precis SD, and Epica DGX 16/32
enclosures via their Ethernet 10Base-T (Link) ports using an RJ-45 crossover cable.
Important: If the system has an RJ-45 connector labeled TCP/IP, do not use it for linking
enclosures. Do not use an RJ-45 enclosure linking connector for a TCP/IP connection.
Cable Length Requirements
To link an Epica DGX 144 to an enclosure with a 10Base-T Ethernet port:
1.
Insert the connector on one end of the RJ-45 crossover cable into the Epica DGX 144 enclosure’s
Enc Link / RJ-45 port.
2.
Insert the connector on the other end of the crossover cable into the Ethernet 10Base-T / RJ-45 port
on the second enclosure’s CPU.
When power is applied, the Ethernet connector LEDs illuminate indicating communication status
(see page 25).
Network Segment Cable Type Max. Distance
Epica DGX 144 to Optima, Optima SD, Precis SD, or Epica DGX 16/32
RJ-45 crossover 100 ft. (30.5 m)
FIG. 10
Epica DGX 144 linked to an Optima using RJ-45 crossover cable
RJ-45 crossover cable
Max. 100 ft. (30.5 m)