Ammann 5932003, Руководство по эксплуатации

Страница: 90 / 174

86 ARX 23-2 T4i, ARX 26-2 T4i
588201
2.9 Special conditions to use the machine
Mount a brake disc on the front drum travel hydraulic motor.
Tighten the screw by half a turn.
Note
Repeat the same procedure for the hydraulic motor of the rear
drum travel.
When the towing is completed, return the machine into
its original shape using the reverse procedure.
Towing procedure
• Secure the articulation joint of the machine against tilting.
• Attach the tow ropes or tow bars.
• Pull out the machine from the danger area.
The towed machine must be attached to both tow lugs.
For towing, use undamaged tow ropes or tow bars of
a sufficient capacity 1.5 × higher than the weight of the
towed vehicle. Do not use a chain for the towing.
It is necessary to maintain the minimal angular deviation
from the direction of towing. The maximum possible
angular deviation is 30°.
The towing movement must be smooth. Do not exceed
the towing speed by more than 1 km/hour (0.6 mph).
Tow the roller at the shortest distance possible – to
rescue when it gets stuck or to remove when it is broken
and obstructing. Do not tow for a distance exceeding
10 m (11 yd).
The towing machine should correspond with its size to
the damaged machine. It must have a sufficient traction
power (output), weight, and brake effect.
While towing downhill using a rope, another towing
machine must be connected to the rear part of the
damaged machine. In this way you can prevent an
uncontrolled motion of the damaged machine.
No person may be on the towed machine!
Do not touch hot parts of the machine, there is a burn
hazard!