Ammann 5932003 Скачать руководство пользователя страница 115

Страница: 115 / 174

111

ARX 23-2 T4i, ARX 26-2 T4i

588045

588046

3-5

615084

615083

MAINTENANCE MANUAL

3.6.8 Sprinkling tank refilling

Check the water level in the tank in the inspection hole.

Open the tank cap and refill with clean water.

Before the winter period, drain the water from the water

tank and from the sprinkling system!

3.6.9 Scraper adjustment

Fixed scrapers (optional equipment)
Loosen the screws and move the scraper so that it is in contact

with the drum.

Hinged scrapers (optional equipment)
The hinged scrapers can be lifted and lowered manually. Before

driving adjust the drum scrapers and move the scraper so that it

is in contact with the drum.

Scrapers for the wheel axle
Adjust the tyre scrapers so that there is a gap of 3–5 mm

between the scraper and the tyre.
Never wipe off the emulsion.

Содержание 5932003















































































































































































Результаты поиска

Содержание 5932003

Отзывы:

Ammann 5932003, Руководство по эксплуатации, Страница: 115 / 174

Результаты поиска

Содержание 5932003

Отзывы: