manualshive.com logo in svg

Ammann 5932003, Руководство по эксплуатации, Страница: 147 / 174

Поделиться
Скачать
Ammann 5932003 Скачать руководство пользователя страница 147

 143

ARX 23-2 T4i, ARX 26-2 T4i

615107

615108

615109

 

MAINTENANCE MANUAL

Maintenance as required

3.6.43  Gas strut replacement 

The gas struts are maintenance-free. They do not require 

any maintenance, such as e.g. lubrication. They are designed 

according to given requirements and work trouble-free for 

years. As soon as the struts stop performing their function, 

replace them with new ones. 

Gas strut  

Order number: 1448823

Before beginning to replace the gas strut, secure the 

engine bonnet against free fall. 
There is a risk of injury!

Removal 
Use a screwdriver to pull out the clamps and release the struts.
Pull out the gas strut away from the ball stud.

Installation 
Push the new gas strut on the ball stud.
The clamp then needs to be safely seated.

Do not install the gas strut if it is damaged due to 

mechanical handling. 
Use genuine parts only!

If you do not need the gas struts any more, dispose of 

them environmentally. 

Содержание 5932003















































































































































































Отзывы:

Нет отзывов