Ammann 5932003 Скачать руководство пользователя страница 134

Страница: 134 / 174

130

ARX 23-2 T4i, ARX 26-2 T4i

593036

3.6 Lubrication and maintenance operations

3.6.27 Electrical installation inspection

Check cables, connectors, protective hoses and their

attachments for damage, in particular if they are near hot

surfaces and moving parts of the machine including the engine.

Replace damaged parts. Use only original spare parts.

3.6.28 Replacement of the fuel separator filter

cartridge

If the red ring goes up from the bottom, drain the water from

the separator.
Close the stop valve (1).
Unscrew the filter housing (2).
Replace the filter element (3).
Refit the filter housing (2).
Open the stop valve (1).
Turn the ignition on. The fuel pump will vent the system

automatically.

Fuel filter cartridge

Order number: 1448216

Do not smoke while working!

Check the water separator for leaks.

Stop the fluid soaking into the ground.

Содержание 5932003















































































































































































Результаты поиска

Содержание 5932003

Отзывы:

Ammann 5932003, Руководство по эксплуатации, Страница: 134 / 174

Результаты поиска

Содержание 5932003

Отзывы: