Ammann 5932003, Руководство по эксплуатации

Страница: 129 / 174

125 ARX 23-2 T4i, ARX 26-2 T4i
593019
593042
1
MAINTENANCE MANUAL
Fill the engine through the filler neck.
Keep the level within the range of gauge marks imprinted in the
dipstick (1). The lower mark shows the lowest possible oil level,
the upper mark indicates the highest.
Refill the oil to the upper oil level mark (1). The oil volume is 7 l
(1.85 gal US) including the oil filter volume.
Note
After refilling, start the engine for 2–3 min. Check tightness of
drain plug and filter.
Stop the engine and wait for 5 minutes until the oil runs down
into the engine sump. Then check the level with the oil dipstick.
Beware of the risk of scalding when draining hot oil.
Let the oil cool down below 50 °C (122 °F).
Follow the fire-fighting measures.
When changing oil, check that the old oil has been
drained from the tank completely. Do not mix different
types of oils.
Change the oil after 6 months at the latest even if 500
hours have not been worked. Exchange oil in the interval
that comes first.
Use recommended filters only; refer to the spare parts
catalogue. Use recommended oils; see Chap. 3.2.1
Catch the drained oil and do not let it soak into the
ground.
Used oil and filters are environmentally hazardous waste
– hand it over for disposal.