Amada RG35S-100, Руководство оператора, Страница: 42 / 110

IV-4
3. HYDRAULIC EQUIPMENT CONTROLS
[2] [2]
[1] [1]
[4] [4]
[6] [6]
[9] [9]
[7] [7]
[5] [5]
[8] [8]
[3] [3]
[1] Pressure adjusting knob (Regulator)
Used to adjust the pressure applied between the punches and dies.
Turned counterclockwise (–) to decrease the pressure and clockwise (+)
to increase the pressure. To obtain the maximum press capacity,
usually keep the knob turned fully clockwise (+).
[2] Bar pedal lock lever (Not installed on RG35S)
Used to lock the bar pedal in the fully pressed state when the ram is
closed to the multiple closing limit. Lock and unlock the bar pedal while
it is pressed.
DANGER
O
When the bar pedal lock lever is used, the
bar pedal is fixed in the fully pressed state,
and the applied pressure is maintained.
The ram may follow the multiple closing
limit setting made with its handwheel and
may produce an excessive pressure.