Amada RG35S-100, Руководство оператора, Страница: 32 / 110

III-4
2. INSTALLATION PROCEDURES
2-1. Location
Select a place where an ample space can be secured for the machine
by paying full attention to the required floor area and the following items:
•
There must be no pillars and other obstacles where the tools are
installed and removed. (At least 835 mm {33 in.} long tools must be
able to be horizontally installed and removed through the left and right
frame gaps of the machine.)
•
The ceiling must be at least 1000 mm {40 in.} from the top of the
machine. (Take the height of the base plates into account.)
•
There must be an additional space to locate a tool storage case and
any other necessary items.
•
Space must be available for worksheet loading, part unloading,
machine maintenance, and other tasks.
A space of 1000 mm {40 in.} or more must be available at the rear of
the machine.
An enough space must be available for the cover of the electrical
enclosure to be opened.
A space of 1000 mm {40 in.} or more must be available from the cover
edge at the right side of the ram.
NOTICE
O
Do not install the machine in a place where it is exposed to dust from such
operations as sandblasting and to direct sunlight, rain and wind.
O
It is ideal to install the machine on a concrete floor to prevent deflection due to
ground subsidence.
1000 mm
{40 in.}
700 mm
{28 in.}
300 mm
{12 in.}
1000 mm
{40 in.}
FRONT