Amada ML-2550A, Руководство по эксплуатации

Страница: 124 / 229

124
ML-2550A/2551A
3. Operating Procedure
(2) Adjust the workpiece and output unit positions to set an appropriate work
distance (distance between the workpiece and the output position).
(3) Press the "MAIN SHUT" setting button to set it to ON to open the resonator
shutter.
(4) Press the "BEAM" button.
A window to set the opening/closing of the branch shutter and beamsplitter is
opened.
⇒
The displayed window depends on the specification.
(5) Press the setting buttons for "SHUTTER 1" to "SHUTTER 4" to set the opening/
closing of the branch shutters.
In this example, set "SHUTTER 1" to ON. Branch shutter 1 is opened and the
corresponding SHUTTER comes on.
(6) Press the "CANCEL" button.
The opening/closing of the branch shutter is set and the window is closed.
⇒
For powersharing, set all the SHUTTERs to be used to ON to open all the branch
shutters.
(7) Press the "POSITION" setting button to set it to ON to output guide light.
The "POSITION" setting button is set to ON and a red dot of guide light appears
at the laser light injecting position. Laser light is injected to the red-dot position.
(8) Check the laser light irradiation position.
If the point to be worked deviates from the red point of guide light, adjust the
position by moving the output unit or workpiece.