manualshive.com logo in svg

Amada ML-2550A, Руководство по эксплуатации

Поделиться
Скачать
Amada ML-2550A Скачать руководство пользователя страница 71

1. Setting Welding Schedules

71

ML-2550A/2551A

Chapter 2  V

arious Settings

 

Introduction Part

Inst
allat
ion and

 

Preparation Part

Operating Part

Maintenance Part

Appendixes

PASSWORD Screen

On the PASSWORD screen, a password is set to protect the set welding schedule.

How to see the displayed items 

 

 

 

 

 

: Settable item

VALUE CHANGE

Sets the validity/invalidity of the set password to ON/OFF.

At OFF, the password is validated and the set values are protected.  At ON, 

the password is not validated and the set values are not protected.

ENTER A 

PASSWORD

Enter a password into the input box from the keyboard displayed on the 

screen.

AC: Deletes all the entered characters.

BS: Deletes a character in front of the cursor one by one.

ENTER: Checks the entered password for correctness.

 

⇒

For the common items in the upper/lower part of the screen, refer to page 63.

Содержание ML-2550A






































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды