Amada ML-2550A, Руководство по эксплуатации

Страница: 64 / 229

64
ML-2550A/2551A
1. Setting Welding Schedules
POSITION Sets the guide light output to ON/OFF.
When the button is pressed, a window to select ON/OFF is displayed.
At ON, guide light is output. At OFF, no guide light is output.
The selected result (ON or OFF) is displayed at the button.
The time required for guide light to go out automatically can be set by "POSITION
AUTO-OFF" on the INITIALIZE screen.
TROUBLE
RESET
Resets the screen by clearing the error display after error processing is
completed. When an error screen appears at occurrence of an error, remove the
cause of the error and press this button. Then, the ordinary screen reappears.
BEAM Sets the opening/closing of the branch shutter or beamsplitter to ON/OFF.
With this button pressed, a window to set the opening/closing of the branch
shutter or beamsplitter is displayed. (The window depends on the setting of the
DIP switch.)
At ON, the branch shutter is opened. At OFF, the branch shutter is closed.
When there is even one branch shutter or beamsplitter set to ON, the button is
displayed in blinking green.
How to Use the Screen Selecting Buttons
SCHED
When this button is pressed, the SCHEDULE screen appears.
Select this button to set laser output conditions or call the set SCHEDULE.
STATUS When this button is pressed, the STATUS screen appears.
Select this button to check the laser welder control method or perform each
setting such as the opening/closing of the branch shutter.
MON
When this button is pressed, the MONITOR screen appears.
Select this button to check the measured value of laser light.
SEAM When this button is selected, the SEAM screen appears.
Select this button to set the output waveform of seam welding.
PASSWD
When this button is pressed, the PASSWORD screen appears.
Select this button to set the password.
PRINT When this button is pressed, the PRINTOUT screen appears.
Select this button to print the set values of each SCHEDULE or the measured
values of the MONITOR screen when an optional printer is connected.