Amada MD Series, Руководство по эксплуатации

Страница: 61 / 111

MD Series
7. Basic Operation
7-1
→
Set the nearest value above the welding current.
→
Select 2-step for welding.
→
Combined control of constant current and constant voltage.
→
Set 10 ms because of the sequencer (PLC) connection.
→
Set for self-holding from the beginning of weld sequence.
→
Select the schedule with a parity from the sequencer.
→
Set the end signal output to 100 ms.
→
In most cases, it should be used as it is.
7. Basic Operation
The operation method for the MD-A10000A is given here as an example.
The settings to be made are as follows:
Schedule No.: #15
Weld sequence: 2-step
Precheck function: ON
Welding method: COMB.
Monitor values: average current and average voltage
Change these settings to suit your purpose of use.

Refer to
5. Connection
, and connect peripheral equipment correctly to the
MD-A10000A
.

Turn the POWER switches of all connected devices on and press the MENU key.
Turn on the POWER switch of the slave device before turning on
that of the master device. Otherwise, a fault may occur.
Check that the display screens and lamps of all connected devices
are turned on normally and the fan motors are operated.

Select STATUS by the cursor keys (

) and
press the ENTER key.

Set functions on the STATUS screen.
Move the cursor to the desired item and select
the function by the + and - keys.
Press the ENTER key, and the selected
function is valid.

Move the cursor to NEXT and press the ENTER key. The second screen appears.
CAUTION
CAUTION