Amada MD Series, Руководство по эксплуатации

Страница: 37 / 111

MD Series
5. Connection
5-16
3
External input signal
・
Selection of schedule number (Common to MD series)
*1: The welding schedule is decided when the time set for START SIG.
TIME on the STATUS screen goes by after the start input.
In the example above, schedule select 1, 4, 8 and 16, and parity are
turned ON, and welding is performed with the schedule No. 29.
・
Time duration from start input to weld sequence start
(Common to MD series)
*1: Time duration from start input to weld sequence start changes
depending on the setting of START SIG. TIME on the STATUS screen.
The following time is required; 1 ms for 1-ms setting, 5 ms for 5-ms
setting, 10 ms for 10-ms setting, and 20 ms for 20-ms setting.
(PARITY)
(SCH 16)
(SCH 8)
(SCH 4)
(SCH 2)
(SCH 1)
*1
Schedule select input
Schedule select input
Schedule select input
Schedule select input
Schedule select input
Start input
Parity input
(2ND)
SQ HD RC CP W1 CL W2
*1
Start input
Welding current
(2ND)