Amada IS-300CA, Руководство по эксплуатации, Страница: 66 / 208

CHAPTER 3: USING PROGRAMMING FUNCTIONS
IS-300CA INVERTER POWER SUPPLY
3-36 990-418
t. COMM SPEED
Selects a communication speed.
9.6k Communication at 9600 bps
19.2k Communication at 19200 bps
38.4k Communication at 38400 bps
For details of the external communication, see External Communication Function .
u. DISPLC SENSOR STEP
Sets the resolution of displacement sensor.
(Example) LGK-110 : 1.0μm
v. REV
When the cursor () is displayed, pressing the ENTER key will change the display to the MODE
SELECT (1) screen.
10. MONITOR MODE Screen
NOTE: This screen shows initial settings. The display surrounded with frame changes
depending on the setting of
WELD2 STOP/WELD COUNT
and
COUNTER
on the
MODE
SELECT
screen.
a. PRESET TOTAL COUNT
The display changes depending on the setting of WELD2 STOP/WELD COUNT and
COUNTER on the MODE SELECT screen. The preset count is the count value set in advance.
When each count reaches the set value, E-28 (Count-up) is displayed and the
COUNT UP signal
is output.
When WELD2 STOP/WELD COUNT is WELD2 STOP and COUNTER is TOTAL, the
PRESET TOTAL COUNT is displayed.
(a)
(b)
(c)
(d)
(e)
(f)
(g)