manualshive.com logo in svg

Alstom SHPM 101, Руководство по обслуживанию

Поделиться
Скачать
Alstom SHPM 101 Скачать руководство пользователя страница 330

SERVICE MANUAL

R5888C

QUADRAMHO

Chapter8

Page 4 of  5

with reset Zone 1 extension. This approach ensures that other features are
retained.

Case connection diagrams:

Single and three phase tripping

S10 SHPM101 sheet 7

Three phase tripping only

S10 SHPM101 sheet 8

1.7

PM007

If module 4 is: RCL 10 001 070

RCL 10 001 071

RCL 10 001 072

The application requirement for this module call for extra output contacts.
To achieve this, a number of existing contacts have had their function changed.
Normally this change is contained in the software, but on this occasion, it has
been necessary to omit the power swing blocking software and hardware features.

The revived contact arrangement is available with all the standard scheme option
TSN 00 to 09.

1.7.1

Fault locator contacts

Zone 3 is included in the logic for driving FLA, FLB and FLC. This enables phase
information to be provided for faults on the busbars (reverse faults).

The FLN logic closes only for single phase faults. this allows it to be used for
energising the signal receive opto-coupler in scheme 04, when the signalling
channel is not in service. Accelerated trips can now be achieved over the whole
length of the line, for single phase faults.

1.7.2

MCB blocking input opto-coupler

To provide the Zone 1 extension feature and allow the relay to be used with
miniature circuit breakers (mcb’s), a separate opto-coupler input is provided for
each function.

Only a normally open contact (n/o) is provided on the mcb, so the logic has been
inverted. This results in the opto-coupler being energised when the mcb is closed,
ie. continually energised under healthy conditions.

1.7.3

Channel in service opto-coupler

The logic for this opto-coupler has been inverted to become “Channel out of
service”. This is necessary to ensure the trip output logic can provide single phase
tripping, even if the opto-coupler is not wired up. Correct auto-reclose logic is also
retained

Case connection diagrams:

Single and three phase tripping

S10 SHPM101.09

Three phase tripping only

S10 SHPM101.10

Содержание SHPM 101

















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды