Alcatel-Lucent OmniSwitch 6850 Series, Руководство по управлению

Страница: 27 / 292

Managing System Files File and Directory Management
OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 page 1-7
Using Wildcards
Wildcards allow you to substitute symbols ( * or ? ) for text patterns while using file and directory
commands. The asterisk ( * ) takes the place of multiple characters and the question mark character ( ? )
takes the place of single characters. More than one wildcard can be used within a single text string.
Multiple Characters
An asterisk ( * ) is used as a wildcard for multiple characters in a text pattern. The following command will
list all entries in the current directory that end with the .log extension:
-> ls *.log
Listing Directory /flash:
-rw 64000 Sep 21 19:49 swlog1.log
-rw 64000 Aug 12 19:06 swlog2.log
The following command lists all entries in the current directory that contain the i character.
-> ls *i*
Listing Directory /flash:
drw 2048 Aug 21 17:49 certified/
drw 2048 Aug 12 18:51 working/
-rw 31 Jul 29 2001 policy.cfg
drw 2048 Jul 28 12:17 switch/
Single Characters
The question mark ( ? ) is used as a wildcard for a single character in a text pattern. The following
command will locate all entries containing swlog followed by any single character and the .log extension.
-> ls swlog?.log
Listing Directory /flash:
-rw 64000 Jul 21 19:49 swlog1.log
-rw 64000 Aug 12 19:06 swlog2.log
The single and multiple character wildcards can be used in combination. The following command lists all
entries containing the letter
i followed by any two single characters.
-> ls *i??
Listing Directory /flash:
drw 2048 Aug 12 18:51 working/