Alcatel-Lucent OmniSwitch 6850 Series, Руководство по управлению

Страница: 221 / 292

Using WebView Configuring the Switch With WebView
OmniSwitch 6800/6850/9000 Switch Management Guide December 2007 page 9-11
Configuration Page
Feature configuration options are displayed in the drop-down menus at the top of each page. The same
menus are displayed on every configuration page within a feature. To configure a feature on the switch,
select a configuration option from the drop down menu. There are two types of configuration pages in
WebView—a Global configuration page and a Table configuration page.
Global Configuration Page
Global configuration pages display drop-down menus and fields that you complete to configure global
parameters. The fields display the current configuration. To change the configuration:
1 Select a new value from one of the drop-down lists or enter a new value in a field.
2
Click Apply to apply the changes to the switch. The new configuration takes effect immediately.
3 Repeat the procedure to make additional configuration changes.
Note. If you update a field and want to return it to the previous configuration, click Restore. However, you
must click Restore before applying the new configuration. If you apply the new configuration and want to
return to the previous configuration, you must re-enter the old configuration in the applicable fields.
Global Configuration Page
Enter a
value.
Select item
from drop-
down menu.
Applies
new
configu-
ration.
Restores
original
field
values.