Alcatel-Lucent OmniSwitch 6850 Series, Руководство по управлению

Страница: 212 / 292

WebView CLI Defaults Using WebView
page 9-2 OmniSwitch 6800/6850/9000 Switch Management Guide December 2007
WebView CLI Defaults
Web Management Command Line Interface (CLI) commands allow you to enable/disable WebView,
enable/disable Secure Socket Layer (SSL), and view basic WebView parameters. These configuration
options are also available in WebView. The following table lists the defaults for WebView configuration
through the
http and https commands
Browser Setup
Your browser preferences (or options) should be set up as follows:
•
Cookies should be enabled. Typically this is the default.
•
JavaScript must be enabled/supported.
•
Java must be enabled.
•
Style sheets must be enabled; that is, the colors, fonts, backgrounds, etc. of web pages should always
be used (rather than any user-configured settings).
•
Checking for new versions of pages should be set to “Every time” when your browser opens.
•
If you are using a proxy server, the proxy settings should be configured to bypass the switch on which
you are running WebView (the local switch).
Typically many of these settings are configured as the default. Different browsers (and different versions
of the same browser) may have different dialogs for these settings. Check your browser help pages if you
need help.
Description Command Default
WebView Status http server enabled
Force SSL http ssl disabled
HTTPS port https port 443
HTTP port http port 80