Managing System Files
Setting the System Clock
OmniSwitch 6800/6850/9000 Switch Management Guide
December 2007
page 1-39
Daylight Savings Time Configuration
The switch can be set to change the system clock automatically to adjust for Daylight Savings Time
(DST). There are two situations that apply depending on the time zone selected for your switch.
If the time zone set for your switch shows DST parameters in the table on
page 1-40
, you need to only
enable DST on your switch by using the following command:
-> system daylight savings time enable
If the time zone set for your switch
does not
show DST parameters in the table on
page 1-40
, you must
specify the start, end, and change parameters for DST by using the
system daylight savings time
command. The following information is needed to specify DST:
•
The day of the week and month of the year when DST will begin.
•
The position of that day in the month (e.g., first, second, third, fourth, or last Sunday of the month).
•
The hour and minute of the day at which DST will begin.
•
The day of the week and month of the year when DST will end.
•
The position of that day in the month (e.g., first, second, third, fourth, or last Sunday of the month).
•
The hour and minute of the day at which DST will end.
•
The number of hours the switch clock will be offset for DST (one hour in most cases).
To set the switch DST parameters so that the clock will move back
one hour
on the
fourth Sunday
of
September
at
11:00 p.m.
and move forward on the
fourth
Sunday
of
March
at
11:00 a.m.
, the following
command should be used:
-> system daylight savings time start fourth sun in Sept at 23:00 end fourth sun
in march at 11:00 by 1
For more details on syntax for this command, please refer to the
OmniSwitch CLI Reference Guide
. You
can also use the question mark (
?
) character in the command syntax to invoke the CLI’s help feature as
described in the “Using the CLI” chapter of this manual.
Note.
By default, Daylight Savings Time is disabled.
Содержание OmniSwitch 6850 Series
