BRIDGE NDI 3G Conversion Gateway Appliance v1.0 70 www.aja.com
Figure 59. Network Settings
Select DHCP or Static for IP Address Type.
When using DHCP, the Network Settings fields are automatically dynamically
populated, and will display "TBD."
When using Static settings, enter values for the following Network Settings:
• IP Address
• Subnet Mask
• Gateway
• Primary DNS Server
• Secondary DNS Server
• DNS Search Path
When finished, click
Apply
.
Network 1 -
For incoming and outgoing media (NDI) signal traffic. Network 1
is capable of a 10 Gig connection. You can also use the Network 1 Ethernet
port for network control of the BRIDGE NDI 3G device, such as accessing the
device from a remote web browser. Except for physically changing cabling
connections, virtually all control of the device can be done from a remote
computer with a web browser.
Network 2 -
For network control of the BRIDGE NDI 3G device. Network 2 is
capable of a 10 Gig connection. If you prefer to separate media traffic from
network control of the BRIDGE NDI 3G device, use the Network 2 Ethernet
port for network control only, and use the Network 1 Ethernet port for media
traffic.
NOTE: Network 2 cannot be used for media traffic.