![AJA BNDI-3G16-R0 Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/aja/bndi-3g16-r0/bndi-3g16-r0_installation-and-operation-manual_2883230020.webp)
BRIDGE NDI 3G Conversion Gateway Appliance v1.0 20 www.aja.com
Determining Encoding vs. Decoding
Figure 8. Showing SDI to NDI Encoding
In the example above, all channels of SDI input are being encoded from SDI to
NDI. The Bank buttons are blue, as is the outline of each Video Tile, which is the
system color for SDI to NDI encoding (SDI In, NDI Out).
When Bank buttons and the outline of each Video Tiles are colored orange, this is
indicating that those channels/groups/banks are set for decoding NDI to SDI (NDI
In, SDI Out).
Changing Between SDI to NDI Encoding and NDI to SDI Decoding
To change between SDI to NDI Encoding and NDI to SDI Decoding, use a single
click on the Cog Icon found on the I/O Screen (and on the Control Bar > Video
Setup Tab). This will toggle between the two modes, and the color of the Bank
Indicators, Video Tile borders, etc., will change accordingly.
Figure 9. SDI to NDI direction
Figure 10. NDI to SDI direction
NOTE: When changing an engine between encode and decode, all system channels/
groups will re-lock to incoming video and a momentary interruption to video and
audio will likely occur.
NOTE: Interface highlights or selections are shown in light yellow.
Each channel or group is represented by a Video Tile, showing the video signal for
confidence monitoring, along with the name of its source.