![AJA BNDI-3G16-R0 Скачать руководство пользователя страница 64](http://html.mh-extra.com/html/aja/bndi-3g16-r0/bndi-3g16-r0_installation-and-operation-manual_2883230064.webp)
BRIDGE NDI 3G Conversion Gateway Appliance v1.0 64 www.aja.com
NOTE: Save packing materials and the shipping box. If your BRIDGE NDI 3G ever requires
service or you move your system, use the packaging materials and box for safe
shipment.
Installation Overview
1. Unpack the shipping box.
2. Mount the physical chassis as desired, using the provided sliding rails.
Cooling airflow enters the chassis from the front, and exits from the rear and
top panels. Do not obstruct these air vents.
3. Connect the two BRIDGE NDI 3G power cords to mains AC. For redundancy,
use both power supplies and connect them to separate branch circuits so
that the BRIDGE NDI 3G will continue to operate even if a circuit breaker
opens on one branch.
4. Connect a computer monitor (user supplied) to the rear VGA port.
5. Connect a keyboard and mouse (user supplied) to available rear USB 3.0
connectors.
6. Connect the 1.0/2.3 DIN to full-size BNC adapter cables to the
BRIDGE NDI 3G input/output connectors.
7. Connect the BRIDGE NDI 3G inputs/outputs to your video sources and
destinations as required.
8. Power up the chassis. The system will boot up to the BRIDGE NDI 3G
application.
Rack Mounting/Environment
Rack Mounting the Chassis
Install the BRIDGE NDI 3G chassis into a standard 19-inch wide equipment rack,
allowing space for cooling airflow. The chassis occupies only one vertical rack
unit.
Two rack rail assemblies are included in the rack mounting kit. Each assembly
consists of two sections: an inner fixed chassis rail that secures directly to the
server chassis and an outer fixed rack rail that secures directly to the rack itself.
The rail assemblies are shipped with rack adapters installed for use with IT (square
hole) style rack frames. For IT racks, simply slide the unit into place, as the rails will
lock automatically. For use with a standard round hole rack frame, you will need
to remove the adapters using a small Phillips head screwdriver.
Cabling
Viewed from the rear, 10GigE Port 01 is on the left, and 10GigE Port 02 is on the
right. All sixteen 3G-SDI spigots can be used for HD or 4K Input or Output.