8.2 Data Acquisition
The parameters, which are required for the recording of measuring data, have
already been described in the menu ´Times-Cycles´ (see section 7). .
1. Time and date
2. Print cycle with storage activation, sleep mode, see 8.6
3. Measuring cycle with storage activation
4. Conversion rate with storage activation
5. Time of start and end of a measurement
Most functions are listed in the menu
´Memory´.
However, here the start/end
time/date are used to define a
time frame at the memory
output, not for the data
recording!
Menu ´
Memory
´:
Number :
(e.g. room 12, measuring point 1) (see Section 8.3)
NUMBER : 12-001 A
Time and date:
12:34:56 01.05.00
Meas. cycle and print cycle with storage activation :
M
:
00:00:00
S
P
:00:12:34
S
Conversion rate with storage activation:
ConvRate: 10 M/s CSU
Internally available memory capacity:
Memory int:0507.3kB
Available free memory space:
No: -- Free:0217.5kB
or when external memories are connected:
Externally available memory capacity:
Memory ext:08.165MB
Number and memory space of the ext. memory:
No: 02 Free:02.734MB
Linear memory without overwriting of data:
RingMemory:-
Activate ring memory with overwriting:
<
ON
>
"
Starting
the recording using the key:
<
START
>
Manual
single storing with key:
<
MANU
>
For control purposes the status line will indicated:
´
REC
´
Stopping
the cyclic recording:
<
STOP
>
Displaying
the data memory (see 8.4):
<
DISP
>
Output
of the memory via interface (see 8.5):
<
>
The
configuration is checked at each start and if it has changed a
number is automatically allocated, indicating the current
configuration with the first two digits (e.g. 02-000, see 8.3).
ALMEMO
®
2590-9
45
Data Memory
C
!
REC COM
|> >|
R01
"
* Memory *
Number: 01-001 A
12:34:56
01.02.00
M:
00:00:00
S P:
00:12:34
U
Memory ext: 04.165MB
No: 02 Free:02.734MB
RingMemory:-
OutputFormat: Columns
StartTime: 07:00:00
StartDate: 01.02.00
EndTime: 17:30:00
EndDate: 01.02.00
DISP PRINT START MANU
