8.5 Memory Output
The content of the data memory can, completely or in parts, be output to the
serial interface. For each output one of the three available output formats ´List´,
´Columns´ or ´Table´ can be used. The option to specify partial ranges is
available as it is possible to set the start and end time of measurements and
also possible to select the number of corresponding identified measurements.
Furthermore, it is possible to selectively read just the alarm values (e.g.
exceeding of limit values) out of the overall memory.
At the output format ´Table´ the output will be cancelled, if the
configuration has changed. For the output of the remaining data
the corresponding number must be activated!
Menu ´
Memory
´:
Setting the output format:
OutputFormat: List
In case of selecting a numbered measurement:
Enter number in function ´NUMBER´ (see 8.3):
NUMBER: 12-001 A
To select a time interval:
Enter the start time using the format ´hh:mm:ss´:
StartTime: 07:00:00
Enter the end time using the format ´hh:mm:ss´:
EndTime: 17:00:00
Enter the start date using the format ´dd:mm:yy´:
StartDate:01.05.00
Enter the end date using the format ´dd:mm:yy´:
EndDate: 01.05.00
Selecting the memory output:
<
>
Selecting the function ´Memory Output´:
* MEMORY OUTPUT *
Soft keys:
ALL NO TIME ALARM
Perform complete output of data memory:
<
ALL
>
Output of a numbered measurement:
<
NO
>
Output of a time interval from start to end:
<
TIME
>
Output of alarm values only:
<
ALARM
>
Menu ´Memory Output´:
During the output of the data memory the
parameters ´Number´, ´Time´ and ´Date´
will be continuously updated.
In the function ´MemoryRest´ the
remaining memory content (in kB) to be
output is continuously indicated.
ALMEMO
®
2590-9
47
Data Memory
C
!
REC COM
|> >|
R01
"
* MemoryOutput *
Number: 01-001 A
12:34:56.00
01.02.00
Memory ext: 4420.5kB
No: 02 Free:2107.4kB
MemoryRest: 1263.5kB
OutputFormat:Table
STOP MANU
