Agilent Technologies R Series, Руководство пользователя

Страница: 64 / 220

Chapter 2: Unpacking and installing the workstation
BenchCel Microplate Handling Workstation R-Series User Guide
30
Electrical
The BenchCel device has the following power requirements. For power
requirements of other devices in the workstation, see the device user
documentation.
Compressed air The BenchCel device requires the use of clean, dry, compressed air to
move pneumatic components inside the device. The compressed air
can be from the following sources:
❑
Centralized source (house)
❑
Compressed-air cylinders
❑
Portable pumps
!! DAMAGE HAZARD !! Using oil compressors can cause oil to
leak into the BenchCel device and void your warranty.
To maintain the desired air supply in the device, the BenchCel device
requires a source of air as follows:
!! DAMAGE HAZARD !!
Air pressure greater than 0.69 MPa
(100 psi) can damage the BenchCel Workstation.
Environment
The lab must meet the following environmental requirements.
Velocity11 recommends that you do the following:
❑
Place the BenchCel Workstation away from heat and air
conditioning ducts.
❑
Place the BenchCel Workstation away from direct sunlight.
Utility Requirement
Electrical 100–240~, 50/60 Hz, 5 A
Fuse
5 A, 250 V, 5
×
20 mm, fast acting
Requirement Value
Quality Clean, dry, compressed
Flow rate 340 Lpm (1.2 cfm)
Pressure 0.65–0.69 MPa (95–100 psi)
Requirement Value
Ambient temperature
5–40 °C
Humidity condition
10–90% RH, non-condensing
Elevation 1–2000 m