Agilent Technologies BioCel 1200, Руководство пользователя

Страница: 99 / 106

93 Chapter 6: Maintenance and troubleshooting
BioCel User Guide
Recovering from a power outage
About this topic
This topic describes behavior of the BioCel when the power is cut to it
and what to do to recover from the outage.
What happens when
the power is cut If there is a main power outage the following events will occur:
❑
The UPS starts to beep while providing power to the devices.
Note: Power to the environmental control will be cut.
❑
VWorks writes an error message to the log, displays an error message
on the screen and notifies you are if you have email notification
configured.
❑
The BioCel continues to run (execute a protocol) until the UPS
charge passes the thresholds specified in VWorks at which time
VWorks closes and the computer performs an orderly shutdown.
Recommended
actions during a
power outage If you are running a protocol and are near the end, you might consider
letting it continue until it is finished.
If you have just started running a protocol and/or require environmental
control for your protocol and you anticipate a lengthy outage, you might
consider stopping the run.
What happens when
the power is
restored If the BioCel was not shut down during the power outage, the system will
receive power, the UPS recharges, and the protocol (if running)
continues.
If the BioCel was shut down during the power outage, it remains off until
you turn it on.
Related topics
Stopping a run “Pausing and stopping a run” on
page 60
For information about... See...
For information about... See...
Setting the VWorks UPS threshold VWorks User Guide
Turning on the BioCel “Turning on the BioCel” on page 43