Agilent Technologies BioCel 1200, Руководство пользователя

Страница: 53 / 106

47 Chapter 3: Preparing for a run
BioCel User Guide
Waste bin set up
Empty the waste bin and replace it under the waste opening in the
BioCel table.
!! INJURY HAZARD !!
If your BioCel has an automatic door over
the waste bin, use caution when removing or replacing the waste
bin. If a protocol is running, the automatic door for the waste
opening may open or close at any time. Low force is used to open
and close the door, so the risk of serious injury is low. However,
protect yourself by keeping away from the door mechanism at all
times.
To remove the waste bin from its hanger:
1. Open the side door nearest the bin.
2. Hold the bin at the top-right corner with your right hand.
3. Lifting the front side of the bin upwards with your right hand, place
your left hand underneath at the bottom-left corner.
4. Supporting the bin with both hands, lift it up and off the hanger,
resting it on the BioCel floor.
5. Slide the bin out of the BioCel.
6. Close the side door.
To replace the waste bin on its hanger:
1. Open the side door nearest the bin.
2. Slide the empty bin into the BioCel until it lies underneath the waste
opening, with the side of the bin resting against the hanger.
Robot arm and plate
00015
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
A1 well