Agilent Technologies BioCel 1200, Руководство пользователя

Страница: 52 / 106

Chapter 3: Preparing for a run
BioCel User Guide
46
Preparing devices and accessories
About this topic This topic provides a quick reference for use when preparing Velocity11
devices and accessories for use on the BioCel.
For procedures for setting up third-party devices, see the manuals for the
individual devices.
The procedures in this topic assume that the devices are already turned
on and that you are familiar with the operation of the devices on your
BioCel.
When to Use
Prepare devices and accessories after you have become familiar with
the protocol.
Set up order
You would typically prepare the BioCel devices and accessories in the
order presented in this topic. Using this order you first set up devices
and accessories that have no time-sensitive elements, and can therefore
be set up the night before the run. Leave the more complex
preparations, which might use expensive and unstable reagents, until
last.
Note: If the protocol includes User Message tasks to prompt you to
perform some setup steps, such as placing counterweight plates, you do
not have to include these steps in the setup.
About placing plates Depending on the protocol you intend to run, you might need to
manually place plates, tipboxes, reservoirs, or counterweights onto
platepads, hotel shelves, VStacks, VSpin rotors, or VPrep shelves.
Always place plates so that the A1 well is in the top-left corner, as viewed
by the robot. The following illustration is from the operator’s perspective.
Interlock override
❑
“Resolving robot errors” on page 87
❑
“Overriding the safety interlock” on
page 90
Checking the UPS charge VWorks User Guide
How this procedure fits into the
overall process of performing a
run “Workflow for preparing the BioCel for
a Run” on page 42
For more information about... See...