Agilent Technologies AGC-100, Руководство пользователя, Страница: 50 / 96

Vacuum Gauge Controller AGC-100
50
DATA LOGGER >
I The data logger group is used for
•
recording measurement data on a USB memory
stick (interface type A on the front of the Center
unit)
•
deleting recorded measurement data from the USB
memory stick
This group is only available when a USB memory stick formatted for the
FAT file system (FAT32) is plugged in. Use a max. 32 GB memory stick.
Not all USB memory sticks are automatically recognized by the
AGC-100, as they (in particular cheaper brands) do not always conform
to USB standard requirements. Try a different memory stick before
contacting your nearest Agilent Technologies service center.
DATE
I Current date
TIME
I Current time
INTERVAL
I Display interval
DEC-SEPARATOR
I Decimal separator
FILENAME
I File name
START / STOP
I Start / stop record
CLEAR
I Deletion of files with displayed measurement data
Value
DATE
I Current date in the format YYYY-MM-DD
e.g.
DATE 2015-04-15
I  e.g. 2016-01-15
Value
TIME
I Current time in the format hh:mm [24 h]
e.g.
TIME 15:45
I  e.g. 15:45
Data logging interval.
Value
INTERVAL
I
INTERVAL 1s
I  Recording interval 1/s
INTERVAL 10s
I  Recording interval 1/10 s
INTERVAL 30s
I  Recording interval 1/30 s
INTERVAL 1min
I  Recording interval 1/60 s
INTERVAL 1%
I  Recording interval: in the event of
measurement value changes ≥ 1%
INTERVAL 5%
I  Recording interval: in the event of
measurement value changes ≥ 5%
4.5.6 Data Logger Mode
Parameters in this group
Date
Time
Interval