Agilent Technologies 8614 B Series, Руководство пользователя, Страница: 218 / 272

5-32
Status Listings
Application-Specific Warnings
8022 desc = “A closing quote is missing.”
help = “The specification file contained a line with an opening quote but no closing
quote could be found.”
8023 desc = “A default path name was used.”
help = “The imported specification file was given a default path name. All
specification files must have at least one PATH statement before any of the
measurement statements. A default path name was used either because some
measurement statements were used before a PATH statement or there was no
PATH statement at all in the file.”
8024 desc = “A variable is expected.”
help = “The statement expected a variable as an input parameter. The line number
indicates which statement did not have the proper input parameter type.”
8025 desc = “The path name has already been used.”
help = “The application allows new names to be assigned to measurement paths.
Once assigned these names can no longer be used by other measurement paths.
Only the first thirty-two characters are significant. The line number indicates where
the problem was found. The word in the parentheses is the path name causing the
problem.”
8026 desc = “A path name was used where a variable is expected.”
help = “The input parameters for measurement statements can take variables as
inputs. These variables are the results of other measurement statements. A path
name is the name of a measurement path not the result of a measurement and
cannot be used as an input parameter. The input parameter was ignored for this
case. The line number indicates where the problem was found. The word in the
parentheses is the path name causing the problem.”
8027 desc = “A parameter value was outside the legal range.”
help = “A parameter value was used which was outside the allowable range. The
first number in the parentheses is the number of the parameter causing the
problem. The other two numbers are the minimum and maximum values allowed.
These values are in base units (e.g meters watts).”
8028 desc = “A minimum non-zero span is required.”
help = “The application cannot run in a zero span setting. The start and stop
wavelength must be separated by a minimum span. The line number indicates the
line in the specification file which had a start and stop wavelength pair that did not
meet the minimum span requirement.”
Table 5-7. Application-Specific Warnings (4 of 6)
Error Number Error Description [description/explanation/examples]