Agilent Technologies 8614 B Series, Руководство пользователя, Страница: 135 / 272

3-61
Function Reference
Recall (Recall Setup Panel)
Key Path System > Printer Setup
Remote Commands HCOPy:DESTination
Printer Shares
Uses the LAN (local area network) to print data to network printers. The data can be printed on
designated, PCL3 format or newer printers.
To access the printer share softkeys, you must first configure the network refer to “Connecting to
the OSA over the Network” on page 4-6 and enter the user share identity/user profile informa-
tion for remote shares ( refer to “File Sharing and Printing over a Network” on page 2-25 ). The
softkeys for file and printer share will then become available for selection.
N o t e Samba
®
or Microsoft
®
software must be installed to run the file share programs.
N o t e If networking is not configured, the command will generate a “Settings conflict” error.
Key Path System > More System Functions > GPIB & Network Setup > Printer Shares
Recall (Recall Setup Panel)
Selects whether all measurement data or only trace data will be recalled from internal memory or
floppy disk or network file shares.
See “Recalling Measurement and Trace Data” on page 2-23
When Measurement (All V State) is selected, all instrument conditions will be recalled.
When the file is recalled, the instrument state will be set to the same state as when the file was
saved.
When Trace(s) Only is selected, the trace data is displayed under the current instrument condi-
tions.
N o t e To insure accurate measurements, a wavelength calibration should be performed each time
measurement is recalled from memory.
Key Path Save/Recall > Recall Menu > Recall