Agilent Technologies 8614 B Series, Руководство пользователя, Страница: 194 / 272

5-8
Status Listings
SCPI-Defined Errors
–109 desc = “Missing parameter”
help = ““
[Fewer parameters were received than required for the header; for example, the
*EMC common command requires one parameter, so receiving *EMC is not
allowed.]
–112 desc = “Program mnemonic too long”
help = ““
[The header contains more that twelve characters (see IEEE 488.2, 7.6.1.4.1).]
–113 desc = “Undefined header”
help = ““
[The header is syntactically correct, but it is undefined for this specific device; for
example, *XYZ is not defined for any device.]
–120 desc = “Numeric Data Error”
help = “
[This error, as well as errors –121 through –129, are generated when parsing a
data element which appears to be numeric, including the non-decimal numeric
types. This particular error message should be used if the device cannot detect a
more specific error.]
–121 desc = “Invalid character in number”
help = ““
[An invalid character for the data type being parsed was encountered; for
example, an alpha in a decimal numeric or a “9” in octal data.]
–123 desc = “Exponent too large”
help = ““
[The magnitude of the exponent was larger than 32000 (see IEEE 488.2,
7.7.2.4.1).]
–124 desc = “Too many digits”
help = ““
[The mantissa of a decimal numeric data element contained more than 255 digits
excluding leading zeros (see IEEE 488.2, 7.7.2.4.1).]
–128 desc = “Numeric data not allowed”
help = ““
[A legal numeric data element was received, but the device does not accept one
in this position for the header.]
Table 5-1. Command Errors (2 of 4)
Error Number Error Description [description/explanation/examples]