Agilent Technologies 8614 B Series, Руководство пользователя, Страница: 205 / 272

5-19
Status Listings
OSA Warnings
5013 desc = “The floppy disk is write protected”
help = “An operation was requested which writes to the floppy disk. The disk
currently in the drive is write-protected. Turn off write protection on the current
floppy disk or replace it with another disk.”
5014 desc = “The internal memory is full”
help = “An operation was requested which uses internal memory. There is not
enough free space left in internal memory for this operation. You must make room
by deleting one or more files.”
5015 desc = “Up/down keys will not alter the span when it is zero”
help = “The up/down step keys may not be used to alter the span setting when it is
zero. A non-zero numeric value must be entered for span in order to leave zero span
mode.”
5016 desc = “Incompatible measurement file”
help = “An attempt was made to recall a measurement file which is incompatible
with the current version of software.”
5017 desc = “The requested file does not exist”
help = “An attempt was made to access a file which does not exist. Check the
spelling of the file name against the listing of available files.”
5020–5030 desc = “I/O Error”
help “An unexpected error occurred during the I/O operation. Please try the
operation again. If the operation involves the floppy disk drive, try a different floppy
disk. If the error persists, please make a note of the error number and contact the
nearest Agilent Technologies Instrument support center for assistance. In the U.S.,
call (800) 403-0801. See the
Agilent 86140B Series Users Guide for a listing of the
Agilent sales and service offices.
5031 desc = “Could not initialize floppy”
help => “A request was made to initialize a floppy disk. The operation did not
succeed. Check to see that there is a floppy disk inserted in the drive and that the
disk is not write protected. This can also be caused by a defective floppy disk.”
5032–5043 desc = “I/O Error”
help “An unexpected error occurred during the I/O operation. Please try the
operation again. If the operation involves the floppy disk drive, try a different floppy
disk. If the error persists, please make a note of the error number and contact the
nearest Agilent Technologies Instrument support center for assistance. In the U.S.,
call (800) 403-0801. See the
Agilent 86140B Series Users Guide for a listing of the
Agilent sales and service offices.
Table 5-6. OSA Warnings (3 of 12)
Error Number Error Description [description/explanation/examples]