AGFA Jeti Tauro H3300LED Series, Руководство оператора

Страница: 74 / 113

Jeti Tauro H3300LED Operator Manual
66
Agfa Graphics
Chapter 5
Opening the Interlocked Operator Door
Front and back operator doors are fitted with an interlock and a handle on both sides, home and
away.
Fig.5-47: Door Interlock and Handle
When the interlocked operator door is open, the system stops the shuttle and the media drive belt
motion.
When the interlocked operator door is open when the system is idle (static green light), you must
perform a system initialization using the “Re-init” button after closing the door. In this condition, the
system initialization takes a few seconds.
When the interlocked operator door is open during system operation, you must perform a system
initialization using the “Re-init” button after closing the door. In this condition, the system initializa -
tion takes a few minutes. Therefore, Agfa recommends opening the operator door only when
the system is idle.
Fig.5-48: Operator Doors Handle Locations
Important: Always use the handles to open the operator door.
Revision 1.0