AGFA Jeti Tauro H3300LED Series, Руководство оператора

Страница: 19 / 113

Jeti Tauro H3300LED Operator Manual
11
Agfa Graphics
Chapter 1
Interlock Operation
When all the doors and covers are closed, the system is safe and operational. This is the mandatory
state for production.
When the front operator access doors are opened while the system is idle (no motion enabled) the
system stays in a safe state. The doors must be closed and a system initialization initiated using the
Re-init button in the system status message screen before submitting a new job. In this condition, the
system initialization takes a few seconds.
When an interlocked door or cover is open while the system is printing, an emergency stop takes
place. This emergency stop immediately stops all axis of movement in the accessed area (for example,
movement of shuttle and transport belt) when opening a main access door. The system disables media
transport belt and shuttle movement. The access doors must be closed and a system initialization initi
-
ated using the Re-init button in the system status message screen before submitting a new job. In this
condition, the system initialization takes a few minutes.
Light Indicator
Fig.1-13: Location of the Left indicator (media
The Jeti Tauro H3300LED features an annunciator light on the top right of the engine. The light reports
status as indicated in Table.
Table: Annunciator Light Modes
Engine Status Light Color Behavior
Power off Red Static
Initializing Orange Blinking
Ready Green Static
Preparing Green Static
Printing Green Blinking
Stand by Orange Static
Error Red Blinking
Whether the Jeti Tauro H3300LED is initializing, printing or in error, a blinking state
always calls for the user’s attention.
Revision 1.0