AGFA Jeti Tauro H3300LED Series Скачать руководство пользователя | Manualshive

Страница: 20 / 113

background image

Jeti Tauro H3300LED Operator Manual

12

Agfa Graphics

Chapter 1

Various

Chemistry Hazards

Chemical safety for the Jeti Tauro H3300LED is limited to the lubricants, inks and solvents used in op-
eration and maintenance of the machine and its components. Consider the safety precautions listed in
this section in order to prevent injury during the use of such materials.

Chemical Material Safety Data Sheet

Material Safety Data Sheet (MSDS) are available at this web site:

www.agfagraphics.com/msds

.

Inks can:
• Irritate the eyes, the respiratory system and the skin.
• Harm aquatic organisms and cause long-term adverse effects in the aquatic environment if not

properly disposed of.

Follow these chemical safety precautions at all times:

• Avoid skin, eye, and open sore contact with any chemicals, lubricants or solvents.

When cleaning the print heads and when handling chemicals, lubricants and solvents always wear
nitrile gloves and safety glasses.
Nitrile gloves have a lifetime limited to 10 minutes when in contact with the ink.
Always dispose the nitrile gloves after usage.

• Protective safety glasses must be chemical and shatter-resistant. We also recommend having side

shields installed on the glasses. The operator should wear goggles or a full-face shield where
necessary.

•   Always wash hands after using chemicals, lubricants or solvents.
•   Always wash clothing exposed to chemicals, lubricants or solvents.
•   Wear a smock or protective layered clothing during the use of chemicals, lubricants or solvents in

case of a spill or contact, so that the user can easily remove these articles to prevent damage.

• The operator and nearby persons should communicate their intentions to one another in order to

prevent inadvertent contact with another person and to avoid a hazardous spill.

• Ensure that proper ventilation is available and keep distance from high-energy heat sources during

the use of chemicals, lubricants and solvents.

• Do not leave jugs, tubes, cans or any other type of container holding chemicals open and

unattended.

• Do not use ingestion as a means of identifying a chemical.

Ink and Solvent First Aid Measures

• Agfa Graphics recommends the installation of a safety eyewash station close

to the chemical use area.

Revision 1.0

«
...
18
19
20
21
22
...
»

Содержание Jeti Tauro H3300LED Series


















































































































Отзывы:

Нет отзывов

Похожие инструкции для Jeti Tauro H3300LED Series

Бренд: Oki Страницы: 207

Бренд: Oki Страницы: 56

Бренд: Oki Страницы: 6

Бренд: Oki Страницы: 8

Бренд: Oki Страницы: 16

Бренд: Oki Страницы: 323

Бренд: Oki Страницы: 36

Бренд: Oki Страницы: 150

Бренд: Oki Страницы: 341

Бренд: Oki Страницы: 177

Бренд: Oki Страницы: 162

Бренд: Oki Страницы: 20

Бренд: Oki Страницы: 104

Бренд: Oki Страницы: 168

Бренд: Oki Страницы: 28

C9600hnColorSignage

Бренд: Oki Страницы: 20

C9600hnColorSignage

Бренд: Oki Страницы: 125

Бренд: Oki Страницы: 279

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды