Chapter 4 HiveManager Examples
62
Aerohive
Assigning Device Settings
1. Click
HiveAP Management
>
New HiveAPs
>
Automatically Discovered
.
2. Select a group of HiveAPs associated with the same map to assign their device settings.
If you defined SNMP sysLocation MIB objects as you installed the HiveAPs as explained in
"Using SNMP" on
page 40
, each HiveAP listed in the HiveAP Management > New HiveAPs > Automatically Discovered window will
now include a map title in the Topology Map column. By clicking the Topology Map column header, you can sort
HiveAPs by topology map. You can then select all the HiveAPs belonging to the same map (use shift-click to
select multiple contiguous HiveAPs) and assign them to the same device group, hive profile, and radio profile.
If you tracked HiveAPs by writing their MAC addresses on the maps as explained in
"Using MAC Addresses" on
page 41
, you can sort the HiveAPs in the HiveAP Management > New HiveAPs > Automatically Discovered window
by MAC address. Click the Node ID column header to display the HiveAPs numerically by MAC address. By
referring to the MAC addresses and the title of the map on which you wrote them during the installation, you
can then select all the HiveAPs belonging to the same map (use control-click to select multiple noncontiguous
HiveAPs) and assign them to the same map, device group, hive profile, and radio profile.
3. Click (Modify button).
4. In the HiveAP dialog box, click the
General
tab, and then enter the following:
•
Device Group: Choose the device group that you want to assign to the selected HiveAPs. In this example,
there are two device groups. Assign DeviceGroup-1 to all the HiveAPs at corporate headquarters, and
DeviceGroup-2 to all HiveAPs at the branch office.
•
Hive ID-Name: Choose the hive profile that you want to assign to the selected HiveAPs. Assign Hive1 to all
HiveAPs in HQ-B1, Hive2 to all HiveAPs in HQ-B2, and Hive3 to all HiveAPs at Branch1.
•
Topology Map: Choose the map that you want to assign to the selected HiveAPs. (If you used the SNMP
sysLocation MIB definition to associate HiveAPs with maps, the HiveManager has already automatically
chosen the correct map.) The maps allow you to organize the HiveAPs by site (HQ or Branch1), then at HQ
by building (HQ-B1 or HQ-B2), and then by floor (HQ-B1-F1, HQ-B1-F2, HQ-B1-F3, and so on).
•
Comment: Enter a useful comment for the HiveAPs for future reference such as contact information of the
IT staff member responsible for their maintenance.
5. Click the
Advanced
tab, enter the following, and then click
OK
:
•
IP Configuration Mode:
DHCP
(default)
•
VLAN for Management Traffic:
1
(default)
•
eth0:
—
Admin State:
Up
(default)
—
Operation Mode:
Backhaul
(default)
—
Speed:
Auto
(default)
—
Duplex:
Auto
(Default)
•
wifi0:
—
Admin State:
Down
(default)
—
Operation Mode:
Access
(default)
—
Radio Profile:
def-radio-profile-mode(bg)
—
Radio Channel:
Auto
(Default)
—
Radio Power:
Auto
(Default)
•
wifi1
—
Admin State:
Up
(default)
—
Operation Mode:
Backhaul
—
Radio Profile:
def-radio-profile-mode(a)
—
Radio Channel:
Auto
(Default)
—
Radio Power:
Auto
(Default)
Содержание HiveAP 20 ag
Страница 1: ...Aerohive Deployment Guide...
Страница 6: ...HiveAP Compliance Information 6 Aerohive...
Страница 64: ...Chapter 4 HiveManager Examples 64 Aerohive...
