Aerohive HiveAP 20 ag, Руководство по развертыванию

Страница: 41 / 90

Deployment Guide 41
Using MAC Addresses
With this approach, you write down the MAC address labelled on the underside of each HiveAP and its location while
installing the HiveAPs throughout the buildings. The MAC address on the label is for the mgt0 interface. Because the
MAC addresses of all HiveAPs begin with the Aerohive MAC OUI 00:19:77, you only need to record the last six
numbers in the address. For example, if the MAC OUI is 0019:7700:0120, you only need to write "000120" to be able
to distinguish it from other HiveAPs later.
1. Make copies of the maps you uploaded to the HiveManager, label them, and take them with you when installing
the HiveAPs.
2. When you install a HiveAP, write the last six digits of its MAC address at its location on the map.
When the HiveManager automatically detects HiveAPs, it displays them in the Manage HiveAPs > New HiveAPs >
Automatically Discovered window. You can differentiate them in the displayed list by MAC address, which allows you
to match the HiveAPs in the GUI with those you noted during installation so that you can properly assign each one to
a map, device group, radio profile, and hive profile.